Global Service Command Reference
*A:ALU-12# show service sdp 8 detail
===============================================================================
Service Destination Point (Sdp Id : 8) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 8
-------------------------------------------------------------------------------
Description
SDP Id
Admin Path MTU
Far End
Admin State
Signaling
Last Status Change
Last Mgmt Change
Flags
KeepAlive Information :
Admin State
Hello Time
Hello Timeout
Max Drop Count
Tx Hello Msgs
Associated LSP LIST :
Lsp Name
Admin State
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALU-12#
Page 128
-(10.10.10.104)
: MPLS-10.10.10.104
: 8
: 0
: 10.10.10.104
: Up
: TLDP
: 02/01/2007 09:11:39
: 02/01/2007 09:11:46
: SignalingSessDown TransportTunnDown
: Disabled
: 10
: 5
: 3
: 0
: to-104
: Up
Table 14: Show Service SDP Output Fields
Label
SDP Id
Description
SDP Source
Adm MTU
Adm Path MTU
Opr MTU
Opr Path MTU
Far End
Adm
Admin State
SDP-Source
Oper Path MTU
Delivery
Oper State
Metric
Adv. MTU Over.
VLAN VC Etype
Oper State
Hello Msg Len
Unmatched Replies
Hold Down Time
Rx Hello Msgs
Oper State
Description
Identifies the SDP
Identifies the SDP by the text description stored its configuration file
Specifies the SDP source type
Specifies the desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router
Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP
Specifies the desired state of the SDP
7705 SAR OS Services Guide
: manual
: 1550
: MPLS
: Down
: 0
: No
: 0x8100
: Disabled
: 0
: 0
: 10
: 0
: Down