Alcatel-Lucent 7705 Service Manual page 387
Service aggregation router os
Hide thumbs
Also See for 7705:
- Configuration manual (532 pages) ,
- Interface configuration manual (226 pages) ,
- Installation manual (176 pages)
Table of Contents
Advertisement
qos
Syntax
qos policy-id
no qos
Context
config>service>ies>sap>egress
config>service>ies>sap>ingress
Description
This command associates a QoS policy with an ingress or egress IES SAP.
QoS ingress and egress policies are important for the enforcement of SLA agreements. The policy ID
must be defined prior to associating the policy with a SAP. If the policy-id does not exist, an error will
be returned.
The qos command is used to associate both ingress and egress QoS policies. The qos command
allows only ingress policies to be associated on the SAP ingress and only egress policies to be
associated on the SAP egress. Attempts to associate a QoS policy of the wrong type returns an error.
Only one ingress and one egress QoS policy can be associated with an IES SAP at one time. Attempts
to associate a second QoS policy of a given type will return an error.
By default, no specific QoS policy is associated with the SAP for ingress or egress; therefore, the
default QoS policy is used.
The no form of this command removes the QoS policy association from the SAP, and the QoS policy
reverts to the default.
Parameters
policy-id — associates the ingress or egress policy ID with the SAP. The policy ID must already exist.
filter
Syntax
filter ip ip-filter-id
no filter [ip ip-filter-id]
Context
config>service>ies>sap>ingress
Description
This command associates an IP filter policy with an ingress IES SAP.
Filter policies control the forwarding and dropping of packets based on IP matching criteria. Only one
filter can be applied to a SAP at a time.
The ip-filter-id must already be defined before the filter command is executed. If the filter policy
does not exist, the operation will fail and an error message will be displayed.
The no form of the command removes any configured filter ID association with the SAP. The filter
policy cannot be deleted until it is removed from all SAPs where it is applied.
Default
no filter
7705 SAR OS Services Guide
Values
1 to 65535
Internet Enhanced Service
Page 387
Advertisement
Table of Contents
Troubleshooting
