Table 36: Show Service Egress Label Output Fields - Alcatel-Lucent 7705 Service Manual

VLL Services Command Reference
903
904
-------------------------------------------------------------------------------
Number of Bindings Found : 19
-------------------------------------------------------------------------------
id
Syntax id service-id
Context show>service
Description This command displays information for a particular service-id.
Parameters service-id — identifies the service in the domain
ingress-label
Syntax ingress-label start-label [end-label]
Context show>service
Description This command displays services using the range of ingress labels.
If only the mandatory start-label parameter is specified, only services using the specified label are
displayed.
If both start-label and end-label parameters are specified, the services using this range of labels are
displayed.
Use the show router vprn-service-id ldp bindings command to display dynamic labels.
Page 302
201:903
401:904

Table 36: Show Service Egress Label Output Fields

Label
Svc Id
Sdp Binding
Type
I. Lbl
E. Lbl
Number of
bindings found
Spok 131061
Spok 131060
Description
Identifies the service
Identifies the SDP
Specifies the SDP binding type (for example, spoke)
Displays the VC label used by the far-end device to send packets to this
device in this service by the SDP
Displays the VC label used by this device to send packets to the far-end
device in this service by the SDP
Indicates the total number of SDP bindings that exist within the
specified egress label range
7705 SAR OS Services Guide
131065
131063