Show Service Commands - Alcatel-Lucent 7705 Service Manual

Show Service Commands

id
Syntax id service-id {all | arp | base | dhcp | interface | sap | sdp}
Context show>service
Description This command displays information for a particular service ID.
Parameters service-id — the unique service identification number that identifies the service in the service domain
all — detailed information about the service
arp — ARP entries for the service
base — basic service information
dhcp — DHCP entries
interface — service interfaces
sap — SAPs associated to the service
sdp — SDPs associated with the service
all
Syntax all
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output
The following output is an example of service ID all information, and
Sample Output
*A:ALU-2#>show>service>id# all
===============================================================================
Service Detailed Information
===============================================================================
Service Id
Service Type
Customer Id
Last Status Change: 02/03/2010 21:59:01
Last Mgmt Change
Admin State
7705 SAR OS Services Guide
: 6
: VPRN
: 1
: 03/01/2010 18:55:58
: Down
Table 58
Oper State : Down
VPRN Services
describes the fields.
Page 481