Alcatel-Lucent 7705 Service Manual page 346

Configuring IES Components
The following example displays the IES SAP creation output.
A:ALU-41>config>service>ies>if>sap# info detail
-------------------------------------------
...
-------------------------------------
Use the following CLI syntax to configure SAP parameters for the IES service.
CLI Syntax: config>service# ies service-id [customer customer-id]
[create] [vpn vpn-id]
Example:
Page 346
A:ALU-41>config>service>ies#
no description
ingress
filter ip 3
exit
atm
encapsulation aal5mux-ip
ingress
traffic-desc 2
exit
egress
traffic-desc 3
exit
oam
alarm-cells
exit
exit
no shutdown
interface ip-int-name
sap sap-id [create]
accounting policy acct-policy-id
collect stats
description description-string
egress
qos policy-id
ingress
filter ip ip-filter-id
qos policy-id
no shutdown
A:ALU-41>config>service# ies 4
A:ALU-41>config>service>ies$ interface "to Internet"
A:ALU-41>config>service>ies>if$ sap 1/4/1 create
A:ALU-41>config>service>ies>if>sap$ egress
A:ALU-41>config>service>ies>if>sap>egress$ qos 3
A:ALU-41>config>service>ies>if>sap$ ingress
A:ALU-41>config>service>ies>if>sap>ingress$ filter ip 3
7705 SAR OS Services Guide