Alcatel-Lucent 7705 Service Manual page 358

IES Command Reference
Generic Commands
description
Syntax description description-string
no description
Context config>service>ies
config>service>ies>interface
config>service>ies>interface>dhcp
config>service>ies>interface>sap
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of this command removes the string from the context.
The dhcp command does not apply to IES when it is used for in-band management.
Parameters description-string — the description character string. Allowed values are any string up to 80
shutdown
Syntax [no] shutdown
Context config>service>ies
config>service>ies>interface
config>service>ies>interface>dhcp
config>service>ies>interface>sap
Description This command administratively disables an entity. The operational state of the entity is disabled as
well as the operational state of any entities contained within. When disabled, an entity does not
change, reset, or remove any configuration settings or statistics. Many objects must be shut down
before they may be deleted. Many entities must be explicitly enabled using the no shutdown
command.
The no form of this command places the entity into an administratively enabled state.
The dhcp command does not apply to IES when it is used for in-band management.
Services are created in the administratively down (shutdown) state. When a no shutdown command
is entered, the service becomes administratively up and tries to enter the operationally up state.
Default administrative states for services and service entities are described in the following Special
Cases.
Page 358
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
7705 SAR OS Services Guide