Alcatel-Lucent 7705 Service Manual page 239

cpipe
Syntax [no] cpipe service-id [customer customer-id] [create] [vpn vpn-id] [vc-type {satop-e1 |
satop-t1 | cesopsn | cesopsn-cas}] [vc-switching]
Context config>service
Description This command configures a circuit emulation service utilizing MPLS or GRE encapsulation. The
vc-type defines the type of unstructured or structured circuit emulation service to be configured. All
other parameters (service-id, customer) have common usage with other service types.
Default no cpipe
Parameters service-id — uniquely identifies a service in the service domain. This ID must be unique to this
customer-id — specifies the customer ID number to be associated with the service. This parameter is
create — keyword used to create a Cpipe. The create keyword requirement can be enabled/disabled
vpn-id — specifies the VPN ID number that allows you to identify virtual private networks (VPNs) by
vc-type — specifies a value that defines the type of the VC signaled to the peer. This optional
vc-switching — specifies that pseudowire switching signaling is used for the spoke SDPs configured
7705 SAR OS Services Guide
service and may not be used for any other service of any type. The service-id must be the same
number used for every 7705 SAR on which this service is defined.
Values 1 to 2147483647
required on service creation and optional for service editing or deleting.
Values 1 to 2147483647
in the environment>create context.
a VPN identification number. If this parameter is not specified, the VPN ID uses the same service
ID number.
Values 1 to 2147483647
Default null (0)
parameter is included when the Cpipe service is created.
Values satop-e1: unstructured E1 circuit emulation service
satop-t1: unstructured DS1 circuit emulation service
cesopsn: basic structured n × 64 kb/s circuit emulation service
cesopsn-cas: structured n × 64 kb/s circuit emulation service with signaling
Default cesopsn
for this service
VLL Services
Page 239