Configuring Pw Redundancy - Alcatel-Lucent 7705 Service Manual

Configuring PW Redundancy

For PW redundancy, create an explicit endpoint and then assign a primary spoke SDP and up
to three secondary spoke SDPs, or up to four secondary spoke SDPs with no primary spoke
SDP, to that endpoint.
CLI Syntax: config>service# cpipe service-id [customer customer-id]
[create]
Example:
The following example displays the PW redundancy configuration output for a Cpipe
service.
*A:7705:Dut-C>config>service>cpipe# info
----------------------------------------------
----------------------------------------------------
*A:7705:Dut-C>config>service>cpipe#
7705 SAR OS Services Guide
endpoint endpoint-name [create]
spoke-sdp sdp-id:vc-id endpoint endpoint-name
[create]
precedence precedence-value
no shutdown
config>service# cpipe 2100
config>service>cpipe$ endpoint "Endpoint_Y" create
config>service>cpipe$ spoke-sdp 1:100 endpoint
"Endpoint_Y" create
config>service>cpipe>spoke-sdp$ precedence primary
config>service>cpipe$ spoke-sdp 2:200 endpoint
"Endpoint_Y" create
config>service>cpipe>spoke-sdp$ precedence 1
no shutdown
endpoint "Endpoint_Y" create
exit
spoke-sdp 1:100 endpoint "Endpoint_Y" create
precedence primary
exit
spoke-sdp 2:200 endpoint "Endpoint_Y" create
precedence 1
exit
VLL Services
Page 219