Table 15: Show Service Sdp-Using Output Fields - Alcatel-Lucent 7705 Service Manual

Sample Output
*A:ALU-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId
-------------------------------------------------------------------------------
1
2
100
101
102
-------------------------------------------------------------------------------
Number of SDPs : 5
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-1#
service-using
Syntax service-using [epipe] [ies] [vprn] [apipe] [ipipe] [cpipe] [sdp sdp-id] [customer customer-
id]
Context show>service
Description
This command displays the services matching certain usage properties.
If no optional parameters are specified, all services defined on the system are displayed.
7705 SAR OS Services Guide
SdpId
300:1
300:2
300:100
300:101
300:102

Table 15: Show Service SDP-Using Output Fields

Label
SvcID
SdpID
Type
Far End
Opr State
I. Label
E. Label
Type Far End
Spok 10.0.0.13
Spok 10.0.0.13
Spok 10.0.0.13
Spok 10.0.0.13
Spok 10.0.0.13
Description
Identifies the service
Identifies the SDP
Indicates the type of SDP (spoke)
Displays the far-end address of the SDP
Displays the operational state of the service
Displays the ingress label used by the far-end device to send packets to
this device in this service by this SDP
Displays the egress label used by this device to send packets to the far-
end device in this service by this SDP
Services Overview
Opr State I.Label E.Label
Up 131071 131071
Up 131070 131070
Up 131069 131069
Up 131068 131068
Up 131067 131067
Page 131