Alcatel-Lucent 7705 Service Manual page 480

VPRN Services Command Reference
The no form of this command removes any configured filter ID association with the SAP or IP
interface. The filter ID itself is not removed from the system unless the scope of the created filter is
set to local. To avoid deletion of the filter ID and only break the association with the service object,
use the scope command within the filter definition to change the scope to local or global. The default
scope of a filter is local.
Parameters
ip-filter-id — the IP filter policy. The filter ID must already exist within the created IP filters.
qos
Syntax qos policy-id
no qos [policy-id]
Context config>service>vprn>if>sap>egress
config>service>vprn>if>sap>ingress
Description This command associates a QoS policy with an ingress or egress SAP. QoS ingress and egress
policies are important for the enforcement of SLA agreements. The policy ID must be defined prior to
associating the policy with a SAP. If the policy-id does not exist, an error will be returned.
The qos command is used to associate both ingress and egress QoS policies. The qos command only
allows ingress policies to be associated on SAP ingress and egress policies on SAP egress. Attempts
to associate a QoS policy of the wrong type returns an error; for example, trying to associate an egress
policy on SAP ingress.
Only one ingress and one egress QoS policy can be associated with a SAP at one time. Attempts to
associate a second QoS policy of a given type will return an error.
By default, no specific QoS policy is associated with the SAP for ingress or egress, so the default QoS
policy is used.
The no form of this command removes the QoS policy association from the SAP, and the QoS policy
reverts to the default.
Parameters policy-id — the ingress or egress policy ID to associate with the SAP on ingress or egress. The policy
Page 480
Values
1 to 65535
ID must already exist.
Values 1 to 65535
7705 SAR OS Services Guide