Alcatel-Lucent 7705 Service Manual page 525

sgt-qos
Syntax sgt-qos
Context show>router service-id
Description This command displays QoS information about self-generated traffic.
Parameters service-id — specifies the service id of the service
application
Syntax application [app-name] [dscp | dot1p]
Context show>router service-id> sgt-qos
Description This command displays application QoS settings.
Parameters app-name — the specified application
Notes:
•
•
7705 SAR OS Services Guide
Table 71: Show Route Table Output Fields (Continued)
Label
Proto
Age
Metric
Pref
No. of Routes:
Values 1 to 2147483647
Values arp, bgp, dhcp, dns, ftp, icmp, isis, ldp, ntp, ospf, ptp, radius, rsvp, snmp, snmp-
notification, ssh, syslog, tacplus, telnet, tftp, traceroute
PTP in the context of SGT QoS is defined as Precision Timing Protocol and is an
application in the 7705 SAR. The PTP application name is also used in areas such as
event-control and logging. Precision Timing Protocol is defined in IEEE 1588-2008.
PTP in the context of IP filters is defined as Performance Transparency Protocol. IP
protocols can be used as IP filter match criteria; the match is made on the 8-bit protocol
field in the IP header.
Description
The protocol through which the route was learned
The route age in seconds for the route
The route metric value for the route
The route preference value for the route
The number of routes displayed in the list
VPRN Services
Page 525