Table 65: Show Service Id Sdp Detailed Output Fields - Alcatel-Lucent 7705 Service Manual

VPRN Services Command Reference
Label
Sdp Id
Type
VC Type
VC Tag
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Acct. Pol
Collect Stats
Ingress Label
Egress Label
Ing mac Fltr
Egr mac Fltr
Ing ip Fltr
Egr ip Fltr
Admin ControlWord
Oper ControlWord
Page 514

Table 65: Show Service ID SDP Detailed Output Fields

Description
The SDP identifier
Indicates whether the SDP is a spoke or a mesh
The VC type: ether or vlan
The explicit dot1Q value used when encapsulating to the SDP
far end
The operating path MTU of the SDP is equal to the admin path
MTU (when one is set) or the dynamically computed tunnel
MTU, when no admin path MTU is set (the default case)
The actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
The IP address of the remote end of the GRE, MPLS, or IP
tunnel defined by this SDP.
Specifies the type of delivery used by the SDP: GRE, MPLS, or
IP
The administrative state of this SDP
The operational state of this SDP
The accounting policy applied to the SDP
Specifies whether accounting statistics are collected on the SDP
The label used by the far-end device to send packets to this
device in this service by this SDP
The label used by this device to send packets to the far-end
device in this service by the SDP
Not applicable
Not applicable
The ingress filter policy ID assigned to the SDP
The egress filter policy ID assigned to the SDP
The administrative state of the control word: Preferred (control
word enabled) or Not Preferred (control word disabled)
The operational state of the control word: True (control word
enabled) or False (control word disabled)
7705 SAR OS Services Guide