Alcatel-Lucent 7705 Service Manual page 254

VLL Services Command Reference
ais-enable
Syntax [no] ais-enable
Context config>service>epipe>sap>eth-cfm>mep
Description This command enables the generation and the reception of AIS messages and applies to Y.1731 SAP
MEPs only.
Default disabled
client-meg-level
Syntax client-meg-level [level [level ...]]
no client-meg-level
Context config>service>epipe>sap>eth-cfm>mep>ais-enable
Description This command configures the client Maintenance Entity Group (MEG) level(s) to use for AIS
message generation. Up to seven levels can be provisioned, with the restriction that the client
(remote) MEG level must be higher than the local MEG level.
Parameters level — specifies the client MEG level
interval
Syntax interval {1 | 60}
[no] interval
Context config>service>epipe>sap>eth-cfm>mep>ais-enable
Description This command specifies the transmission interval of AIS messages in seconds.
Parameters 1 | 60 — the transmission interval of AIS messages in seconds.
Page 254
Values 1 to 7
Default 1
Default 1
7705 SAR OS Services Guide