Eth-Cfm (802.1Ag And Y.1731) Tasks; Configuring Eth-Cfm Parameters (802.1Ag And Y.1731) - Alcatel-Lucent 7705 Service Manual

ETH-CFM (802.1ag and Y.1731) Tasks

This section provides a brief overview of the following ETH-CFM tasks:

Configuring ETH-CFM Parameters (802.1ag and Y.1731)

Configuration commands for both the 802.1ag and the Y.1731 functions are entered in an
eth-cfm context (either global or Epipe service). For information on Ethernet OAM
commands for 802.1ag and Y.1731 OAM, refer to the "Ethernet OAM Capabilities" section
in the 7705 SAR OS OAM and Diagnostics Guide.
An 802.1ag MEP and a Y.1731 MEP are similar in function. Configure a MEP to be a
Y.1731 MEP by choosing the format none keywords in the global domain command, and
the format icc-based keywords in the global association command.
802.1ag Configuration
The first set of commands occurs at the global level. The second set occurs at the Epipe
service level.
*A:ALU-1>config>eth-cfm# info
----------------------------------------------
----------------------------------------------
*A:ALU-1>config>service>epipe# info
----------------------------------------------
7705 SAR OS Services Guide
• Configuring ETH-CFM Parameters (802.1ag and Y.1731)
• Applying ETH-CFM Parameters
domain 1 name "kanata_MD" level 5
association 1 format string name "kanata_MA"
bridge-identifier 2
exit
ccm-interval 60
remote-mepid 125
exit
exit
shutdown
sap 1/5/1 create
eth-cfm
mep 1 domain 1 association 1 direction down
shutdown
exit
exit
exit
spoke-sdp 1:11 create
eth-cfm
mep 2 domain 1 association 1 direction down
shutdown
exit
Services Overview
Page 95