Alcatel-Lucent 7705 Service Manual page 486

VPRN Services Command Reference
Page 486
Table 58: Show Service ID All Output Fields (Continued)
Label
Vrf Export
SAP Count
SDP Bind Count
Service Destination Points (SDPs)
SDP Id
Type
VC Type
VC Tag
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Acct. Pol
Collect Stats
Ingress Label
Egress Label
Ing mac Fltr
Egr mac Fltr
Ing ip Fltr
Description
The VRF export policy applied to this service
The number of SAPs specified for this service
The number of SDPs bound to this service
The SDP identifier
Indicates whether this service SDP binding is a spoke or a
mesh
The VC type: ether or vlan
The explicit dot1Q value used when encapsulating to the
SDP far end
The desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
The actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Specifies the IP address of the remote end of the GRE,
MPLS, or IP tunnel defined by this SDP
Specifies the type of delivery used by the SDP: GRE,
MPLS, or IP
The administrative state of this SDP
The operational state of this SDP
The accounting policy applied to the SDP
Specifies whether accounting statistics are collected on the
SDP
The label used by the far-end device to send packets to this
device in this service by this SDP
The label used by this device to send packets to the far-end
device in this service by this SDP
Not applicable
Not applicable
The SDP ingress filter policy ID
7705 SAR OS Services Guide