Table 73: Dscp-To-Fc Mapping Output Fields - Alcatel-Lucent 7705 Service Manual

static-arp
Syntax static-arp [
Context show>router
Description This command displays the router static ARP table sorted by IP address.
If no options are present, all ARP entries are displayed.
Parameters ip-address — the IP address for which static ARP entries are displayed
ip-int-name — the interface name for which static ARP entries are displayed
ieee-mac-addr — the MAC address for which static ARP entries are displayed
Output
The following output is an example of static ARP table information, and
fields.
Sample Output
*A:ALU-12# show router 6 static-arp
===============================================================================
ARP Table (Service: 6)
===============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
12.200.1.1
------------------------------------------------------------------------------
No. of ARP Entries: 2
==============================================================================
*A:ALU-12#
7705 SAR OS Services Guide

Table 73: DSCP-to-FC Mapping Output Fields

Label
DSCP Value
FC Value
Default FC Value
ip-address
| ip-int-name | mac ieee-mac-addr]
MAC Address
00:00:5a:40:00:01 00:00:00
00:00:5a:01:00:33 00:00:00
Description
The DSCP values (displayed as names) of the self-
generated traffic
The FC value mapped to each DSCP value
The default FC value
Expiry Type Interface
Sta to-ser1
Inv to-ser1a
VPRN Services
Table 74
describes the
Page 529