Alcatel-Lucent 7705 Service Manual page 264

VLL Services Command Reference
precedence
Syntax precedence [precedence-value | primary]
no precedence
Context config>service>apipe>spoke-sdp
config>service>cpipe>spoke-sdp
config>service>epipe>spoke-sdp
config>service>ipipe>spoke-sdp
Description This command specifies the precedence of the spoke SDP when there are multiple spoke SDPs
associated with one service endpoint. One SDP binding can be assigned to be the primary SDP
binding, leaving three bindings for secondary bindings, or, if no primary spoke SDP is defined, up to
four secondary spoke SDPs can be configured. When an SDP binding goes down, the next highest
precedence SDP binding will begin to forward traffic.
The no form of the command returns the precedence value to the default.
Default
4
Parameters
precedence-value — specifies the spoke SDP precedence
primary — makes the specified spoke SDP the primary spoke SDP (primary is indicated on the CLI
vc-label
Syntax vc-label egress-vc-label
no vc-label [egress-vc-label]
Context config>service>apipe>spoke-sdp>egress
config>service>cpipe>spoke-sdp>egress
config>service>epipe>spoke-sdp>egress
config>service>ipipe>spoke-sdp>egress
Description This command configures the egress VC label.
Parameters egress-vc-label — indicates a specific connection
Page 264
Values
1 to 4 (where 1 is the highest precedence)
display as the value 0)
Values
16 to 1048575
7705 SAR OS Services Guide