Alcatel-Lucent 7705 Service Manual page 276

VLL Services Command Reference
Label
Service Destination Points (SDPs)
Description
SDP Id
Type
VC Type
VC Tag
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Acct. Pol
Collect Stats
Ingress Label
Egress Label
Admin ControlWord
Oper ControlWord
Last Status Change
Page 276
Table 34: Show Service-ID All Command Output Fields (Continued)
Description
Displays generic information about the SDP
Identifies the SDP
Identifies the service SDP binding type (for example, spoke)
Displays the VC type for the SDP (for example, CESoPSN)
The explicit dot1Q value used when encapsulating to the SDP
far end
Specifies the desired largest service frame size (in octets) that
can be transmitted through this SDP to the far-end router,
without requiring the packet to be fragmented
Specifies the actual largest service frame size (in octets) that
can be transmitted through this SDP to the far-end router,
without requiring the packet to be fragmented
Displays the IP address of the remote end of the MPLS or GRE
tunnel defined by this SDP
Specifies the type of delivery used by the SDP (MPLS or
GRE)
Specifies the administrative state of this SDP
Specifies the operational state of this SDP
The accounting policy ID assigned to the SAP
Specifies whether collect stats is enabled
Displays the label used by the far-end device to send packets to
this device in this service by this SDP
Displays the label used by this device to send packets to the
far-end device in this service by this SDP
Specifies the administrative state of the control word:
Preferred (control word enabled) or Not Preferred (control
word disabled)
Specifies the operational state of the control word: True
(control word enabled) or False (control word disabled)
Specifies the time of the most recent operating status change to
this spoke SDP
7705 SAR OS Services Guide