Alcatel-Lucent 7705 Service Manual page 301

Service aggregation router os

Hide thumbs Also See for 7705:

Table of Contents

egress-label

egress-label start-label [end-label]

show>service

This command displays services using the range of egress labels.

If only the mandatory start-label parameter is specified, only services using the specified label are

If both start-label and end-label parameters are specified, the services using this range of labels are

Use the show router ldp bindings command to display dynamic labels.

start-label — indicates the starting egress label value for which to display services using the label

end-label — indicates the ending egress label value for which to display services using the label range

The following output is an example of service egress-label information, and

Sample Output

*A:ALU-12# show service egress-label 0 131071

===============================================================================

Martini Service Labels

===============================================================================

-------------------------------------------------------------------------------

7705 SAR OS Services Guide

range. If only start-label is specified, services only using start-label are displayed.

0, 2048 to 131071

the start-label value

2049 to 131071

VLL Services

describes the

Troubleshooting