Alcatel-Lucent 7705 Service Manual page 366

IES Command Reference
filter ip
Syntax filter ip ip-filter-id
no filter
no filter [ip ip-filter-id]
Context config>service>ies>interface>sap>ingress
Description
This command associates an IP filter policy with an ingress SAP. Filter policies control the
forwarding and dropping of packets based on the IP match criteria. Only one filter ID can be
specified.
The filter policy must already be defined before the filter command is executed. If the filter policy
does not exist, the operation fails and an error message is returned. Filters applied to the ingress SAP
apply to all IP packets on the SAP.
The no form of this command removes any configured filter ID association with the SAP.
Default no filter
Parameters
ip-filter-id — the filter name acts as the ID for the IP filter policy expressed as a decimal integer. The
Note: For information on configuring IP filter IDs, refer to the 7705 SAR OS Router
Configuration Guide, "Filter Policies".
atm
Syntax atm
Context config>service>ies>interface>sap
Description This command enables access to the context to configure ATM-related attributes. This command can
only be used when a given context (for example, a channel or SAP) supports ATM functionality such
as:
If ATM functionality is not supported for a given context, the command returns an error.
Page 366
filter policy must already exist within the config>filter>ip-filter context.
Values 1 to 65535
• configuring ATM port or ATM port-related functionality on T1/E1 ASAP Adapter cards or
T1/E1 ports
• configuring ATM-related configuration for ATM-based SAPs that exist on T1/E1 ASAP
Adapter cards or T1/E1 ports
7705 SAR OS Services Guide