Alcatel-Lucent 7705 Service Manual page 260

VLL Services Command Reference
The no form of the command removes any configured filter ID association with the SAP. The filter
policy cannot be deleted until it is removed from all SAPs where it is applied.
Default
no filter
Parameters ip-filter-id — the IP filter policy ID number
qos
Syntax qos policy-id
no qos
Context config>service>apipe>sap>egress
config>service>apipe>sap>ingress
config>service>cpipe>sap>egress
config>service>cpipe>sap>ingress
config>service>epipe>sap>egress
config>service>epipe>sap>ingress
config>service>ipipe>sap>egress
config>service>ipipe>sap>ingress
Description This command associates a QoS policy with an ingress or egress SAP.
QoS ingress and egress policies are important for the enforcement of SLA agreements. The policy ID
must be defined prior to associating the policy with a SAP. If the policy-id does not exist, an error will
be returned.
The qos command is used to associate both ingress and egress QoS policies. The qos command only
allows ingress policies to be associated on SAP ingress and egress policies on the SAP egress.
Attempts to associate a QoS policy of the wrong type returns an error.
Only one ingress and one egress QoS policy can be associated with a SAP at one time. Attempts to
associate a second QoS policy of a given type will return an error.
By default, no specific QoS policy is associated with the SAP for ingress or egress, so the default QoS
policy is used.
The no form of this command removes the QoS policy association from the SAP, and the QoS policy
reverts to the default.
Parameters
policy-id — associates the ingress or egress policy ID with the SAP on ingress or egress. The policy
Page 260
Values 1 to 65535
ID must already exist.
Values 1 to 65535
7705 SAR OS Services Guide