Alcatel-Lucent 7705 Service Manual page 110

Global Service Command Reference
Customer Commands
customer
Syntax customer customer-id [create]
no customer customer-id
Context config>service
Description This command creates a customer ID and customer context used to associate information with a
particular customer. Services can later be associated with this customer at the service level.
Each customer-id must be unique and the create keyword must follow each new customer customer-
id entry.
To edit a customer's parameters, enter the existing customer customer-id without the create
keyword.
Default customer 1 always exists on the system and cannot be deleted.
The no form of this command removes a customer-id and all associated information. Before
removing a customer-id, all references to that customer in all services must be deleted or changed to a
different customer ID.
Parameters customer-id — specifies the ID number to be associated with the customer, expressed as an integer
contact
Syntax contact contact-information
no contact
Context config>service>customer
Description This command allows you to configure contact information for a customer. Include any customer-
related contact information such as a technician's name or account contract name.
The no form of this command removes the contact information from the customer ID.
Default No contact information is associated with the customer-id.
Parameters contact-information — the customer contact information entered as an ASCII character string.
Page 110
Values 1 to 2147483647
Allowed values are any string up to 80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
7705 SAR OS Services Guide