Table 32: Sap Id Configurations - Alcatel-Lucent 7705 Service Manual

Parameters sap-id — specifies the physical port identifier portion of the SAP definition
port-id — specifies the physical port ID in the slot/mda/port format
bundle-id — specifies the multilink bundle to be associated with this IP interface. The bundle
7705 SAR OS Services Guide
The sap-id can be configured in one of the formats described in
Type Syntax
port-id slot/mda/port[.channel]
null [port-id | bundle-id]
dot1q [port-id | bundle-id]:qtag1
atm [port-id | bundle-id][:vpi/vci |vpi]
cem slot/mda/port.channel
ipcp slot/mda/port.channel
Values sap-id:
If the card in the slot has an adapter card installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example, 1/2/3 specifies port 3 on MDA 2
in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents TDM
channels, the port ID must include the channel ID. A period "." separates the physical port from
the channel-id. The port must be configured as an access port.
keyword must be entered at the beginning of the parameter. The command syntax must be
configured as follows:

Table 32: SAP ID Configurations

null [port-id | bundle-id]
dot1q [port-id | bundle-id]:qtag1
atm [port-id | bundle-id][:vpi/vci |vpi |vpi1.vpi2]
cem slot/mda/port.channel
ipcp slot/mda/port.channel
port-id slot/mda/port[.channel]
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 to 10
qtag1 0 to 4094
vpi NNI 0 to 4095
UNI 0 to 255
vci 1, 2, 5 to 65535
VLL Services
Table 32
.
Example
1/1/5
port-id: 1/1/3
bundle-id: bundle-ppp-1/1.1
port-id:qtag1: 1/1/3:100
bundle-id: bundle-ppp-1/1.1
port-id: 1/1/1.1
bundle-id: bundle-ima-1/1.1
bundle-ppp-1/1.1
vpi/vci: 16/26
vpi: 16
1/1/1.3
1/2/2.4
Page 245