VLL Services Command Reference
sap
Syntax
sap sap-id [detail]
Context
show>service>id
Description
This command displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters
sap-id — identifies the SAPs for the service in the form slot/mda/port[.channel]
detail — displays detailed information for the SAP
Output
The following output is an example of service-id SAP information, and
Following the table are output examples for:
Sample Output (Apipe)
*A:ALU-12>show>service>id# sap 1/4/1.1:2 detail
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id
SAP
Description
Admin State
Flags
Multi Svc Site
Last Status Change : 04/30/2008 13:55:04
Last Mgmt Change
Page 306
Table 39: Service-ID Labels Output Fields
Label
Svc Id
Sdp Binding
Type
I. Lbl
E. Lbl
•
Sample Output (Epipe)
•
Sample Output (Ipipe)
: 2
: 1/4/1.1:2
: Apipe SAP
: Up
: PortOperDown L2OperDown
: None
: 05/07/2008 15:51:51
Description
Identifies the service
Identifies the SDP bound to the service
Indicates the SDP binding type (for example, spoke)
Displays the VC label used by the far-end device to send packets to this
device in this service by the SDP
Displays the VC label used by this device to send packets to the far-end
device in this service by the SDP
7705 SAR OS Services Guide
Table 40
Encap
: atm
Oper State
: Down
describes the fields.