Table 43: Sap Id Configurations; Table 44: Sap Id Configurations - Alcatel-Lucent 7705 Service Manual

IES Command Reference
port-id — specifies the physical port ID in the slot/mda/port format
bundle-id — specifies the multilink bundle to be associated with this IP interface. The bundle
qtag1 — specifies the encapsulation value used to identify the SAP on the port or subport. If this
Page 384
The sap-id can be configured in one of the formats described in
Type Syntax
port-id slot/mda/port[.channel]
null port-id
dot1q port-id:qtag1
ipcp slot/mda/port.channel
bundle bundle-type-slot/mda.bundle-num
Values sap-id:
If the card in the slot has an adapter card installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example, 1/2/3 specifies port 3 on MDA 2
in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents TDM
channels, the port ID must include the channel ID. A period "." separates the physical port from
the channel-id. The port must be configured as an access port.
keyword must be entered at the beginning of the parameter. The command syntax must be
configured as follows:
bundle-id:
bundle-id value range:
For example:
*A:ALU-12>config# port bundle-ppp-5/1.1
*A:ALU-12>config>port# multilink-bundle
parameter is not specificially defined, the default value is 0.
Values qtag1:

Table 44: SAP ID Configurations

port-id slot/mda/port[.channel]
null port-id
dot1q port-id:qtag1
ipcp slot/mda/port.channel
bundle-type-slot/mda.bundle-num
bundle keyword
type ppp
bundle-num 1 to 10
qtag1 0 to 4094
bundle-type-slot-id/mda-slot.bundle-num
1 to 10
0 to 4094
7705 SAR OS Services Guide
Table 44
.
Example
1/1/5
port-id: 1/1/3
port-id:qtag1: 1/1/3:100
1/2/2.4
bundle-ppp-1/1.1