Configuring Global Cflowd Parameters - Alcatel-Lucent 7710 SR OS Configuration Manual

Configuring Global Cflowd Parameters

The following cflowd parameters apply to all instances where cflowd (traffic sampling) is enabled.
Use the following CLI commands to configure cflowd parameters:
CLI Syntax: config>cflowd#
The following example displays a common cflowd component configuration:
A:ALA-1>config>cflowd# info
#------------------------------------------
#------------------------------------------
A:ALA-1>config>cflowd#
7710 SR OS Router Configuration Guide
active-timeout minutes
cache-size num-entries
inactive-timeout seconds
overflow percent
rate sample-rate
template-retransmit seconds
no shutdown
active-timeout 20
inactive-timeout 10
overflow 10
rate 100
Cflowd
Page 489