Alcatel-Lucent 7705 Service Manual page 277

Label
Signaling
Last Mgmt Change
Flags
Mac Move
Peer Pw Bits
Peer Fault Ip
Peer Vccv CV Bits
Peer Vccv CC Bits
Keepalive Information
Admin State
Oper State
Hello Time
Hello Msg Len
Max Drop Count
Hold Down Time
Statistics
I. Fwd. Pkts.
I. Dro. Pkts.
7705 SAR OS Services Guide
Table 34: Show Service-ID All Command Output Fields (Continued)
Description
Specifies the signaling protocol used to obtain the ingress and
egress labels used in frames transmitted and received on this
SDP
Specifies the time of the most recent management-initiated
change to this spoke SDP
Displays the conditions that affect the operating status of this
spoke SDP. Display output includes PathMTUtooSmall,
SdpOperDown, NoIngVCLabel, NoEgrVCLabel, and so on
Indicates the administrative state of the MAC movement
feature associated with the service
Displays the setting of the pseudowire peer bits. Display output
includes pwNotforwarding, psnIngressFault, psnEgressFault,
IacIngressFault, lacEgressFault
N/A
Displays the setting of the pseudowire peer VCCV control
verification bits (lspPing)
Displays the setting of the pseudowire peer VCCV control
channel bits (pwe3ControlWord and/or mplsRouterAlertLabel)
Specifies the administrative state of the keepalive protocol
Specifies the operational state of the keepalive protocol
Specifies how often the SDP Echo Request messages are
transmitted on this SDP
Specifies the length of the SDP Echo Request messages
transmitted on this SDP
Specifies the maximum number of consecutive SDP Echo
Request messages that can be unacknowledged before the
keepalive protocol reports a fault
Specifies the amount of time to wait before the keepalive
operating status is eligible to enter the alive state
Specifies the number of forwarded ingress packets
Specifies the number of dropped ingress packets
VLL Services
Page 277