Alcatel-Lucent 7705 Service Manual page 454

VPRN Services Command Reference
dot1p-app-name — the dot1p application name
dot1p-priority — the dot1p priority
dscp
Syntax dscp dscp-name fc fc-name
no dscp dscp-name
Context config>service>vprn>sgt-qos
Description This command creates a mapping between the DSCP of the self-generated traffic and the forwarding
class.
Self-generated traffic that matches the specified DSCP will be assigned to the corresponding
forwarding class. Multiple commands can be entered to define the association of some or all of the
64 DSCP values to the forwarding class. For undefined code points, packets are assigned to the
forwarding class specified under the default-action command.
All DSCP names that define a DSCP value must be explicitly defined.
The no form of this command removes the DSCP-to-forwarding class association. The default action
then applies to that code point value.
Default none
Parameters dscp-name — the DSCP name to be associated with the forwarding class. DSCP can only be specified
fc-name — the forwarding class name. All packets with a DSCP value or MPLS EXP bits that are not
Page 454
Values arp, isis
Values none, 0 to 7
by its name and only an existing value can be specified. The software provides names for the
well-known code points.
Values be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11,
af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15,
cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41,
cp42, cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57,
cp58, cp59, cp60, cp61, cp62, cp63
defined will be placed in this forwarding class.
Default none (the fc name must be specified)
Values be, l2, af, l1, h2, ef, h1, nc
7705 SAR OS Services Guide