Alcatel-Lucent 7705 Service Manual page 33

Table 2: 7705 SAR-8 and 7705 SAR-F Comparison (Continued)
7705 SAR-8
16-port T1/E1 ASAP
Adapter card
8-port Ethernet
Adapter card
Requires user
configuration at card
(IOM) and MDA
(adapter card) levels
7705 SAR OS Services Guide
7705 SAR-F
16 individual T1/E1
ports on the faceplate
8 individual Ethernet
ports on the faceplate
Configuration at card
(IOM) and MDA
(adapter card) levels
is preset and users
cannot change these
types
Notes
The T1/E1 ports on the 7705 SAR-F are equivalent to the
T1/E1 ports on the 16-port T1/E1 ASAP Adapter card, except
that the 16 T1/E1 ports on the 7705 SAR-F support multiple
synchronization sources to support two timing references.
On the 7705 SAR-8, the CLI indicates the MDA type for the
16-port T1/E1 ASAP Adapter card as a16-chds1. On the
7705 SAR-F, the CLI indicates the MDA type for the
7705 SAR-F ports as a16-chds1v2.
The –48 VDC versions of the 7705 SAR-8 support two
versions of the 8-port Ethernet Adapter card, with version 2
having additional support for Synchronous Ethernet. The
Ethernet ports on the 7705 SAR-F are equivalent to the
Ethernet ports on version 2 of the 8-port Ethernet Adapter
card and support multiple synchronization sources to support
two timing references.
The +24 VDC version of the 7705 SAR-8 only supports
version 2 of the 8-port Ethernet Adapter card.
On the 7705 SAR-8, the CLI indicates the MDA type for the
8-port Ethernet Adapter card as a8-eth or a8-ethv2. On
the 7705 SAR-F, the CLI indicates the MDA type for the
7705 SAR-F Ethernet ports as a8-ethv3, to distinguish it
from the actual version 2 of the 8-port Ethernet Adapter card.
Getting Started
Page 33