Alcatel-Lucent 7705 Service Manual page 130

Global Service Command Reference
sdp-using
Syntax sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context show>service
Description This command displays services using SDP or far-end address options.
Parameters sdp-id — displays only services bound to the specified SDP ID
vc-id — thsse virtual circuit identifier
ip-address — displays only services matching with the specified far-end IP address
Output
The following output is an example of service SDP-using information, and
fields.
Page 130
Table 14: Show Service SDP Output Fields (Continued)
Label
Rx Hello Msgs
Collect Stats.
Associated LSP LIST:
Note: If the SDP type is GRE, the following message displays: SDP Delivery Mechanism is not
MPLS
Lsp Name
Time since Last Trans*
Values 1 to 17407
Values 1 to 4294967295
Default
services with any far-end IP address
Description
Specifies the number of SDP echo request messages received since the
keepalive was administratively enabled or the counter was cleared
Specifies that the collection of accounting and statistical data for the
SDP is enabled or disabled
For MPLS: identifies the name of the static LSP
For MPLS: specifies the time that the associated static LSP has been in
service
7705 SAR OS Services Guide
Table 15
describes the