Table 42: Sdp Output Fields - Alcatel-Lucent 7705 Service Manual

VLL Services Command Reference
KeepAlive Information :
Admin State
Hello Time
Max Drop Count
Statistics
I. Fwd. Pkts.
I. Fwd. Octs.
E. Fwd. Pkts.
-------------------------------------------------------------------------------
CPIPE Service Destination Point specifics
-------------------------------------------------------------------------------
Local Bit-rate
Local Payload Size : 64
Local Sig Pkts
Local CAS Framing
Local RTP Header
Local Differential : No
Local Timestamp
===============================================================================
*A:csasim2>show>service>id#
Page 322
: Disabled
: 10
: 3
:
: 0
: 0
: 0
: 1
: No Sig.
: No CAS
: No
: 0
Label
Service Destination Points (SDPs)
Description
SDP Id
Type
VC Type
VC Tag
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Hello Msg Len
Hold Down Time
I. Dro. Pkts.
I. Dro. Octs.
E. Fwd. Octets
Peer Bit-rate
Peer Payload Size : n/a
Peer Sig Pkts
Peer CAS Framing
Peer RTP Header
Peer Differential : No
Peer Timestamp

Table 42: SDP Output Fields

Description
Displays generic information about the SDP
Identifies the SDP
Identifies the service SDP binding type (for example, spoke)
Displays the VC type for the SDP (for example, CESoPSN)
The explicit dot1Q value used when encapsulating to the SDP far
end
Specifies the desired largest service frame size (in octets) that can
be transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end router, without
requiring the packet to be fragmented
Displays the IP address of the far end of the MPLS or GRE tunnel
defined by this SDP
Specifies the type of delivery used by the SDP (MPLS or GRE)
Specifies the administrative state of this SDP
7705 SAR OS Services Guide
: Disabled
: 0
: 10
: 0
: 0
: 0
: n/a
: No Sig.
: No CAS
: No
: 0