Debug Service Commands - Alcatel-Lucent 7705 Service Manual

Debug Service Commands

id
Syntax [no] id service-id
Context debug>service
Description This command debugs commands for a specific service.
The no form of the command disables debugging.
Parameters service-id — the ID that uniquely identifies a service
sap
Syntax [no] sap sap-id
Context debug>service>id
Description This command enables debugging for a specific SAP.
The no form of the command disables debugging.
Parameters sap-id — the physical port identifier portion of the SAP definition. See
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id
debug>service>stp
Description
This command enables debugging for a specific SDP.
The no form of the command disables debugging.
Parameters
sdp-id — the spoke SDP ID
vc-id — the virtual circuit ID on the SDP ID
7705 SAR OS Services Guide
Values
1 to 17407
1 to 4294967295
VPRN Services
sap
for sap-id values.
Page 537