Engine Coolant Temperature Sensor - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

ENGINE COOLANT TEMPERATURE SENSOR

4. Engine Coolant Temperature

1) Disconnect battery ground cable.

2) Remove air intake duct and air cleaner assem-

bly. <Ref. to IN-7, REMOVAL, Air Intake Duct.> and

<Ref. to IN-6, REMOVAL, Air Cleaner Case.>

3) Disconnect connector from engine coolant tem-

perature sensor.

4) Remove engine coolant temperature sensor.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

18 N·m (1.8 kgf-m, 13.0 ft-lb)

FU(w/oOBD)-27

Fuel Injection (Fuel Systems)

Table of Contents