ENGINE COOLANT TEMPERATURE SENSOR
Fuel Injection (Fuel Systems)
4. Engine Coolant Temperature
Sensor
S185047
A: REMOVAL
S185047A18
1) Disconnect battery ground cable.
G6M0095
2) Remove the generator <Ref. to SC-12,
REMOVAL, Generator.>
3) Disconnect connector from engine coolant tem-
perature sensor.
EN0851
4) Remove engine coolant temperature sensor.
B: INSTALLATION
S185047A11
Install in the reverse order of removal.
Tightening torque:
18 N·m (1.8 kgf-m, 13 ft-lb)
FU(DOHC TURBO)-29