asieps_tobira_IM_US.book 30 ページ 2012年1月17日 火曜日 午後3時48分
Engine Coolant Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
4. Engine Coolant Temperature
Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
FU-00009
2) Remove the generator. <Ref. to SC(H4SO)-14,
REMOVAL, Generator.>
3) Drain engine coolant. <Ref. to CO(H4DOTC)-
19, DRAINING OF ENGINE COOLANT, RE-
PLACEMENT, Engine Coolant.>
4) Disconnect the connectors from the engine cool-
ant temperature sensor.
FU-00055
5) Remove the engine coolant temperature sensor.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
FU(H4DOTC)-30