Fiches n
24 and 26
Fault finding using bargraph illumination
Check/ensure the continuity and the isolation of the connection between
track A of the automatic transmission computer connector and the
injection computer connector (track 22 for E7J engine, track 41 for the
Check the condition of the wiring on the injection computer side and the
IF the wiring is not faulty, replace the automatic transmission computer
On E7J* version, erasing the memory requires the no load and full load
*
And vehicles with load information supplied by the injection computer.
(Without load potentiometer specific to the automatic transmission).
AUTOMATIC TRANSMISSION
BARGRAPH 3 LH ILLUMINATED:
between the automatic transmission computer
and the injection computer (load information)
D7F engine). Does the fault persist after checking/repairing?
automatic transmission computer side.
and erase the memory (M 4-3).
values to be reprogrammed.
Connection fault
yes
23-211
23
no
Success
2DMXTT1.0