Table of Contents
Advertisement
7.4.4 Aspect ratio control
Menu
Top→OUTPUT TIMING→ASPECT PROCESS
Setting for
Each input/input signal
Setting value L-BOX/S-PANEL : letter box/side panel [Default]
S-CUT/TB-CUT : Side cut/top bottom cut
7.4.5 Overscan
Menu
Top→OUTPUT TIMING→INPUT OVER SCAN
Setting for
Each input/input signal
Setting value 100% to 115%
[Default] NTSC / PAL / SDTV: 105%; HDTV / PC: 100%
You can set enlarged display of input video.
7.4.6 Display position
Menu
Top→OUTPUT TIMING→INPUT POSITION (Input side) / OUTPUT POSITION (Output side)
Setting for
Input side
Output side
Setting value
Input side:
Horizontal position (－Horizontal input size
Vertical position
Output side:
Horizontal position (－Horizontal output size to ＋Horizontal output resolution [Default] 0)
Vertical position
You can set the position where input video is displayed.
Note:
If the resolutions of each output are not the same, the resolution of OUT1 will be the standard.
Input signal
L-BOX/S-PANEL
16:9 input video is output to
a 4:3 sink device.
4:3 input video is output to a
16:9 sink device.
[Fig. 7.4] Restoring aspect ratio
: each input/input signal
: each output (COMMON TO OUTA AND OUTB)
(－Vertical input size
(－Vertical output size
MSD-501/502/701/702 User's Guide
Output signal
S-CUT/TB-CUT
Letter box
Side cut
Side panel
Top/bottom cut
to ＋Horizontal output resolution [Default] 0)
to ＋Vertical output resolution
to ＋Vertical output resolution
[Default] 0)
[Default] 0)
35
Advertisement
Table of Contents
