Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.4.4 Aspect ratio control
Menu
Top→OUTPUT TIMING→ASPECT PROCESS
Setting for
Each input channel, each input signal
Setting value L-BOX/S-PANEL : letter box/side panel [Default]
S-CUT/TB-CUT : Side cut/top bottom cut
Below is a visual description of restoring aspect ratio:
9.4.5 Overscan
Menu
Top→OUTPUT TIMING→INPUT OVER SCAN
Setting for
Each input channel, each input signal
Setting value 100% to 115%
[Default] NTSC / PAL / SDTV: 105 %, HDTV / PC: 100 %
You can create an enlarged display of input video.
9.4.6 Display position
Menu
Top→OUTPUT TIMING→INPUT POSITION (input side) / OUTPUT POSITION (output side)
Setting for
Input side : Each input channel, each input signal
Output side : Each output channel
Setting value
Input side:
Horizontal position (-Horizontal input size to +Horizontal output resolution [Default] 0)
Vertical position
Output side:
Horizontal position (-Horizontal output size to +Horizontal output resolution [Default] 0)
Vertical position
You can set the position where input video is displayed.
Note:
If the resolutions of each output are not the same, the resolution of OUT1 will be the standard.
50
Input signal
L-BOX/S-PANEL
16:9 input video is output to
a 4:3 sink device.
4:3 input video is output to a
Side panel
16:9 sink device.
[Fig. 9.5] Restoring aspect ratio
(-Vertical input size to +Vertical output resolution
(-Vertical output size to +Vertical output resolution
Output signal
S-CUT/TB-CUT
Letter box
Side cut
Top/bottom cut
[Default] 0)
[Default] 0)
Advertisement
Table of Contents
