Output Level; Output Mute; Selecting Audio Input; Audio Input Level - IDK MSD-6203 User Manual

MSD-62 Series User's Guide

9.10.1 Output level

Menu Top→AUDIO→OUTPUT LEVEL
Setting for Each output channel
Setting value -60dB to 10dB
You can set the audio output level.
If you change the output level while audio output mute is set to "ON", it will be unmuted.
If you set "9.18.8 Top page" to "AUDIO VOLUME", you can change the output level from the top page.

9.10.2 Output mute

Menu Top→AUDIO→OUTPUT MUTE
Setting for Each output channel
Setting value OFF [Default], ON
You can mute/ unmute the output audio.
If you set "9.18.8 Top page" to "AUDIO VOLUME", you can change the mute setting.

9.10.3 Selecting audio input

Menu Top→AUDIO→AUDIO INPUT SELECT
Setting for Each input channel
Setting value DIGITAL [Default], ANALOG1, ANALOG2
You can select digital or analog audio input to be output.
DIGITAL: Outputs audio of HDMI input. IN7 and IN8 do not output audio if "9.7.5 Selecting signal of DVI
input connector" is set to "ANALOG".
ANALOG1 and ANALOG2: Output audio that is input to analog audio input connector 1 or 2..

9.10.4 Audio input level

Menu Top→AUDIO→INPUT OFFSET
Setting for Each input channel, each input signal
Setting value -60dB to 0dB [Default] 0dB
You can set the audio input level.
You can correct the gap in audio input levels of each input signal, because audio input level can be set for
each input connector.
100
[Default] 0dB