MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.9.1 Output level
Menu
Top→AUDIO→OUTPUT LEVEL
Setting for
Each output channel (Common to OUTA / OUTB)
Setting value -60dB to 10dB [Default] 0dB
You can set the audio output level.
If you change the output level while audio output mute is set to "ON", mute is canceled.
If you set top display of front VFD screen to audio volume adjustment from "9.17.6 Top page", you can
change and set audio output level from top display.
9.9.2 Output mute
Menu
Top→AUDIO→OUTPUT MUTE
Setting for
Each output channel (Common to OUTA / OUTB)
Setting value OFF [Default], ON
You can enable or disable the audio output mute.
If you set top display of front VFD screen to audio volume adjustment from "9.17.6 Top page", you can
change and set mute ON/OFF from top display.
9.9.3 Input selection
Menu
Top→AUDIO→AUDIO INPUT SELECT
Setting for
Each input channel
Setting value DIGITAL [Default], ANALOG1, ANALOG2, ANALOG3
You can select digital or analog audio input to be output.
DIGITAl: Outputs HDMI audio. IN6 and IN7 do not output audio if "9.6.5 Selecting signal of DVI input
connector" is set to "ANALOG".
ANALOG1, ANALOG2, and ANALOG3: Output audio that is input to each connector.
9.9.4 Input level
Menu
Top→AUDIO→INPUT OFFSET
Setting for
Each input channel, each input signal
Setting value -60dB to 0dB [Default] 0dB
You can set the audio input level.
You can correct the gap in audio input levels of each input signal, because audio input level can be set for
each input connector.
78