Table of Contents
Advertisement
90Y
Groove
Groove
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
–
CHAIN SUB–ASSY (1AZ–FE)
37.
REMOVE NO.2 CHAIN SUB–ASSY
(a)
Turn the crankshaft counterclockwise 90Y, and align an
adjusting hole of the oil pump drive shaft gear with the
groove of the oil pump.
A77382
(b)
Put a 4 mm diameter bar in the adjusting hole of the oil
pump drive shaft gear to lock in position, and remove the
nut.
A77383
(c)
Remove the bolt, and then remove the chain tensioner
and spring.
(d)
Remove the oil pump drive shaft gear and chain No. 2.
A66833
38.
INSTALL NO.2 CHAIN SUB–ASSY
(a)
Set the crankshaft key to the left side position.
(b)
Orient the flat portion of the drive shaft upward.
B11424
http://vnx.su
14–145
Advertisement
Table of Contents
