5.5
Setting Up the Hardware
5.5.1
System Arrangement with an UltiMate 3000 System
Charged Aerosol Detectors Corona Veo (RS) Operating Manual
This section describes how to set up the hardware and provides
information about the detector connectors and cables.
If the detector is part of an UltiMate 3000 system, for example for
analytical HPLC applications, stack the individual modules as shown
below.
The system arrangement may vary depending on the system
configuration.
Figure 5: UltiMate 3000 system configuration with charged aerosol
detector (example for system arrangement)
5
•
Installation
No.
Description
1
Solvent Rack (optional)
2
Pump
3
Autosampler
4
Column Compartment
5
Charged Aerosol Detector
Page 67