Siemens Sinamics G120P Operating Instructions Manual page 323

Scalar value
The bar chart and the scalar value are set up in a similar way.
The following example shows how the status screen is defined for the scalar value.
1.
2.
3.
4.
5.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
In the "Set status screen" menu, select the "Scalar
value" option.
Select the screen position of the value that you wish
to change.
Select the parameter value to be displayed at the
selected screen position.
Select the dimension unit for the selected parameter
value.
When selecting a dimension unit that is different than
the default one, you must define the conversion from
one unit to the other.
Define the conversion factors to convert the units.
Operation
6.10 Operation with the IOP
323