Danger of injury due to touching hot surfaces on the braking resistor
In operation, the braking resistor can reach high temperatures, which can cause burns if
touched.
• Allow the braking resistor to cool down before starting any work.
• Use the appropriate personnel protection equipment, e.g. gloves.
Table 4- 43
Width
Height
Depth
Figure 4-24
Dimension drawing for braking resistor (50 kW)
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
CAUTION
Dimensions of the braking resistor
Unit
mm
mm
mm
Electrical installation
4.9 Other connections
50 kW resistor (option L62)
736
1321
484
117