Siemens Sinamics G120P Operating Instructions Manual page 153

Figure 5-14
The dialog screen lists all existing devices in the project.
Specify access point:
● Select DEVICE access for a device, if the connection to the programming device or PC is
established via the USB interface.
● Select S7ONLINE access for a device, if the connection to the programming device or PC
is established via PROFINET or PROFIBUS.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Specifying the target device selection and access point
5.5 Procedure for commissioning via STARTER
Commissioning
153