Siemens Sinamics G120P Operating Instructions Manual page 175

Table 6- 2
Connectors, CI: Connector input, CO: Connector output
A connector is a digital signal e.g. in 32–bit format. It can be used to emulate words (16 bits),
double words (32 bits) or analog signals. Connectors are subdivided into connector inputs
(signal sink) and connector outputs (signal source).
The options for interconnecting connectors are restricted to ensure that performance is not
adversely affected.
Table 6- 3
Abbreviation and sym-
Interconnecting signals using BICO technology
To interconnect two signals, a BICO input parameter (signal sink) must be assigned to the
desired BICO output parameter (signal source).
The following information is required in order to connect a binector/connector input to a
binector/connector output:
• Binectors:
• Connectors with no index: Parameter number
• Connectors with index:
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Binectors
Abbreviation and
symbol
Binector input
Binector input
(signal sink)
Binector output
Binector output
(signal source)
Connectors
bol
Connector input
Connector input
(signal sink)
Connector output
Connector output
(signal source)
6.2 Basic information about the drive system
Name
Can be interconnected to a binector output as
source.
The number of the binector output must be en-
tered as a parameter value.
Can be used as a source for a binector input.
Name
Can be interconnected to a connector output as
source.
The number of the connector output must be en-
tered as a parameter value.
Can be used as a source for a connector input.
Parameter number and bit number
Parameter number and index
Operation
Description
Description
175