Menu; Overview - Siemens Sinamics G120P Operating Instructions Manual

Note
Selection of the jog speeds
The jog parameters p1058 (jog speed 1) and p1059 (jog speed 2) must be set to the
appropriate speeds. The default jog speeds are 150 rpm and -150 rpm.
Once jog speed 1 and jog speed 2 have been set, pressing the "INFO" key for a longer time
switches between the two jog speeds.
6.10.4

Menu

6.10.4.1

Overview

Overview
The "Menu" screen is selected from the three menu options in the lower area of the IOP
screen. If the menu options are not displayed, press the navigation wheel once to display
them.
Menu selection
If the "Menu" option is selected, the following functions are displayed:
● Diagnostics
● Parameters
● Wizards
● Upload/download
● Tools
Mark the desired function by turning the navigation wheel. Press the navigation wheel to
confirm the selection. Further submenus will be displayed. Press the "Esc" key briefly to
return to the previous screen. If the key is pressed for a longer time, the "Status" screen will
be displayed.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
6.10 Operation with the IOP
Menu screen
Operation
311