Starter Commissioning Tool - Siemens Sinamics G120P Operating Instructions Manual

Commissioning

5.4 STARTER commissioning tool

5.4 STARTER commissioning tool
Description
You can use the STARTER commissioning tool to configure and commission SINAMICS
drives and drive systems. The drive can be configured using the STARTER drive
configuration wizard.
Note
STARTER online help
This section shows you how to carry out commissioning using STARTER. STARTER
features a comprehensive online help function, which provides detailed explanations of all
the processes and available system settings.
For this reason, this section only describes the individual commissioning steps.
Prerequisite: STARTER Version
The following STARTER version is required for commissioning SINAMICS with firmware
V4.7:
● STARTER V4.4
Prerequisites for installing STARTER
Hardware
The following minimum requirements must be complied with:
● PG or PC with Pentium III min. 1 GHz (recommended > 1 GHz)
● 1 GB work memory (2 GB recommended)
● Screen resolution 1024×768 pixels, 16-bit color depth
● Free hard disk space > 3 GB
Software
The following minimum prerequisites must be observed when using STARTER without an
existing STEP-7 installation:
● Microsoft Internet Explorer V6.0 or higher
32-bit operating systems:
● Microsoft Windows 2003 Server SP2
● Microsoft Windows XP Professional SP3
● Microsoft Windows 7 Professional incl. SP1
● Microsoft Windows 7 Ultimate incl. SP1
● Microsoft Windows 7 Enterprise incl. SP1 (standard installation)
142
*)
Operating Instructions, 12/2014, A5E32923362A
Inverter cabinet units