Operating mode
This option allows you to access the parameters for the follow-
ing operating modes.
• Setpoint addition
• Torque setpoints
• Torque limitation
• Current controller / power unit
• Motor
Drive functions
This option allows you to access the parameters for the follow-
ing drive functions.
• Shutdown functions
• Brake control
• Automatic restart
• Flying restart
• Safety Integrated
• Messages / monitoring functions
The inverter must be in a safe state before parameters with
reference to the functions listed above can be changed.
Communication
When this option is selected, you can access the control and
configuration parameters for the fieldbus communication of the
inverter.
The parameters can be displayed for confirmation of their
settings and values, and in specific cases, also changed.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Operation
6.10 Operation with the IOP
319