Siemens Sinamics G120P Operating Instructions Manual page 150

Commissioning
5.5 Procedure for commissioning via STARTER
⇒ Once you have done this, click OK to confirm the settings and return to the project wizard.
Figure 5-10
⇒ Click on Continue > to set up a drive unit in the project wizard.
A search is made for the connected device online via the selected access point (in this case,
via USB), and is then displayed in the preview window of the project Wizard.
Figure 5-11
⇒ Click on Continue >
A project summary is displayed.
150
Complete setting the interface
Drive unit inserted
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A